Wait at least 6 seconds and then return the cap to pins If you install two hard disks, you must configure the second drive as a slave device by setting its jumper accordingly. After connecting one end to the motherboard, connect the other end to the floppy drive. Make sure to unplug the power supply before adding or removing DIMMs or other system components. Follow these steps to install a DIMM.

Uploader: Mezticage
Date Added: 25 October 2012
File Size: 18.31 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 87085
Price: Free* [*Free Regsitration Required]

Asus A8AE-LE – Best Compatible Asus A8AE-LE Mobo

Internal Connectors PIN 1. These are not jumpers! Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector.

The USB module is purchased separately.

Note: There are two version of A8AE-LE on the HP website

The minimum recommended wattage is W, or W for a fully configured system. To erase the Password move the jumper cap from pins Default to pins Clear Password.

I installed a raid-0 array using an add-in pci card based on the SilA. Click here to see the detailed mods and info on adding the Raid bios.


Doing so will damage the motherboard! The system may become unstable and may experience difficulty powering up if the power supply is inadequate. To print the manual completely, please, download it. Line In port light blue.

The CPU fits only in one correct orientation. This mark should vidwo a specific corner on the socket to ensure correct installation. I have looked at BIOS screen from other mobo’s based upon the same chipsets but see no control over PCI bus wait states in them either, but also cannot tell if they force wait states or not.

HP and Compaq Desktop PCs – Motherboard Specifications, A8AE-LE (AmberineM)

The figure shows a network card install on the PCI Express x1 slot. You may also connect a compliant internal hard disk to this connector. See your a8ae-lr documentation for specific instructions.

Table of Contents Add to my manuals Add. Removing the jumper causes PC startup failure! Clearing the BIOS password. Onboard audio or audio card. The LED lights up when you turn on the system power, and z8ae-le when the system is in sleep mode.



The plugs from a8ad-le power supply are designed to fit these connectors in only one orientation. Install an expansion card following the instructions that came with the chassis. Locate the Socket and open it by pulling the lever gently sideways away from the socket. DO NOT place jumper caps on the fan connectors! The plugs from the power supply are designed to fit these connectors in only one orientation.

Attach the pin cable plug to this connector, and the 6-pin cable plug to the vidwo. Unlock a DIMM socket by pressing the retaining clips outward. Any programmers refernces deaing with this level of detail?

Motherboard layout and photos. DIMMs are keyed to fit with only one direction. This port connects a headphone or a speaker. VGA Graphic Adapter port.